Motor Components
Usage | Hybrid Car Motor Cores |
---|---|
Material | Electromagnetic Steel Sheets |
Material Thickness | 0.15 ~ 0.35 mm |
Model | MSP-2200 ~ -4000 |
Usage | Automobile Motors |
---|---|
Material | SuperDyma |
Material Thickness | 1.4 mm |
Production Method/No. of Stages | 15-Stage Progressive Forming |
Model | PMX-3000 |
Metalforming Point | I.D./O.D. Tolerance: ±0.02 or Better; Perpendicularity of Burred Area Exterior Surface and Flat Area: 0.08 degrees or better. |
Usage | Automobile Motor Cases (Round Type) |
---|---|
Material | SUS316L |
Material Thickness | 0.5 mm |
Production Method/No. of Stages | Transfer Forming |
Model | NC2-2000 x 2 |
Usage | Automotive Motor Cases |
---|---|
Material | SPHE |
Material Thickness | 1.6 mm |
Production Method/No. of Stages | 15-Stage Transfer Forming |
Model | TMX-5000 |
Metalforming Point | Restrains Material Thinning in Drawn Corner Areas; Flatness & Concentricity Tolerance: 0.1 or Better |
Usage | Motor Stators & Rotors |
---|---|
Material | Electromagnetic Steel Sheets |
Material Thickness | 0.5 mm |
Production Method/No. of Stages | 12-Stage Progressive Forming @ 250min-1 |
Model | MSP-3000 |
Metalforming Point | Component Height is Approx. 120 mm |
Usage | Compressor Stators & Rotors |
---|---|
Material | Electromagnetic Steel Sheets |
Material Thickness | 0.5 mm |
Production Method/No. of Stages | 13-Stage Progressive Forming @ 280min-1 |
Model | MSP-3000 |
Metalforming Point | Component Height is Approx. 70 mm |
Usage | Compressor Stators & Rotors |
---|---|
Material | Electromagnetic Steel Sheets |
Material Thickness | 0.35 mm |
Production Method/No. of Stages | 13-Stage Progressive Forming @ 300min-1 |
Model | MSP-3000 & HMX-3000(1) |
Metalforming Point | Component Height is Approx. 50 mm |